Gas Fitter in Griffin
Gas work around a house means cooktop installs, appliance services, bayonet points and supply checks, and every part of it needs a licensed gasfitter. Our plumbers carry the Queensland gas work licence alongside their plumbing licences, so booking a gas fitter in Griffin means one team covers both sides. The full run of trades across Griffin sits on the home page.
If we're late, $100 comes off your bill
- Licensed and InsuredEvery job done by a licensed plumber. QBCC No: 15024607
- Fixed Quote FirstFlat-rate pricing, agreed before any work starts
- Lifetime Labour WarrantyBacked by our Fix-It-or-It's-Free guarantee (T&Cs apply)
- $0 Call-Out FeesNo extra charge for nights, weekends or public holidays
Gas fitting is licensed work here, and this page sets out what that means for you. We're available 24/7, with no extra charge for nights, weekends or public holidays.
What Gas Fitting Work Covers
Gas work, in the Queensland Government's terms, means installing, altering, removing, servicing, repairing, testing or certifying a gas system, along with every pipe and connection belonging to it. That definition covers the whole fuel side of a house, from the meter or cylinders through to the last appliance.
It reaches both fuel gases found in Queensland homes: natural gas arriving by pipe and LPG held in bottles or a tank. A licensed gasfitter is the only person allowed to carry any of it out.
Servicing counts too. Appliances such as cookers, barbecues and heaters should be checked and serviced periodically by a licensed gasfitter, and used following the maker's instructions.
Housing here is mostly 2000s-present brick and render builds, so most of our gas calls are additions and alterations rather than repairs to ageing gas lines.
Why Gas Quotes Differ From Job to Job
Four things drive the price: the work itself, how easily we reach the pipework, how many gas points the job involves, and whether a supply check applies. A fixed quote locks the figure before anyone picks up a tool, so nothing surprises you.
The job
a repair, a service or a new install each carries a different workload.
Access
reaching pipework behind a built-in cabinet takes longer than an open wall.
Gas points
each extra point means more pipe, more joints and more testing.
Supply
confirming the system can feed an added appliance comes first.
Access varies a lot across the suburb. A townhouse near Fern Parade Reserve can hide pipework inside shared walls, while a detached home along Shoreview Boulevard usually leaves it reachable.
Who May Do Gas Work in Queensland
Queensland law reserves gas work for licensed gasfitters, and nobody else may carry it out. Ask to see the person's gas work licence before they start any gas work; the Queensland Government tells owners to make that check every time.
Plumbing sits on its own licence path. For plumbing and drainage, the QBCC issues an occupational licence covering the hands-on work and a contractor licence covering anyone taking jobs on as a business.
Owners can verify a tradie themselves. QBCC's online register shows whether a plumber holds a licence and whether a Form 4 has been registered for the property.
The Gas Compliance Certificate After Installation
A gas system compliance certificate is the signed record that a finished gas installation or alteration meets the rules. The licence holder gives you, the owner, the original immediately on completion.
Where a distribution network supplies your gas, its operator also gets a copy within 5 days.
A couple of points stand out:
- Certificates attach to installations and alterations, not to every gas job.
- Keep your copy with the property paperwork, as later work and any sale may need it.
The Gas Jobs We Take On
Three gas services sit under this page, each with its own detail:
Gas leak repairs
suspect smells, failed tests and traced faults.
Gas cooktop installation
new appliances connected, checked and certified.
Gas bayonet installation
outdoor points for BBQs and patio heaters.
Gas hot water units have their own page, covered under hot water plumbing.
How a Gas Booking Runs
- 1
Tell us what's happening
Call (07) 3524 7137 or send the form with a few details about the problem in Griffin. A clear description helps us bring the right parts.
- 2
We Test and Check the Supply
A licensed gasfitter inspects the appliance or line involved, runs the relevant leak and pressure checks, and confirms the supply can carry the load before any quote is written.
- 3
Approve a fixed price
You get a fixed quote before any work starts, with flat-rate pricing and no hidden fees. Nothing goes ahead until you say yes.
- 4
Pay when it's finished
Pay by card or EFTPOS on site once the job's done, or ask about Fix now, pay later.
Plumbing job in Griffin?
$0 call-out fees, available 24/7, and same-day where we can.
Why Griffin Owners Book Our Gas Work
Same Rate After Hours
Calls in Griffin come with $0 call-out fees, and there's no added charge for nights, weekends or public holidays.
Flat-Rate Pricing
Flat-rate pricing with no hidden fees, set out in a fixed quote before any work starts.
Lifetime Labour Warranty
Our labour carries a lifetime labour warranty, our Fix-It-or-It's-Free guarantee backs it (T&Cs apply), and if we're late, $100 comes off your bill.
QBCC Licensed and Insured
We work under QBCC No: 15024607, licensed and insured, and every job is done by a licensed plumber.
Questions People Ask About Gas Work
Call (07) 3524 7137Are plumbers and gas fitters the same trade?
No, they sit on separate licences. Plumbing and drainage work runs on an occupational licence plus a contractor licence, while gas work calls for a gas work licence of its own. Ask which licences your tradesperson holds before anything begins.
How do I check a gas fitter's licence in Griffin?
Request the gas work licence up front, before tools come out. For plumbing, the QBCC's online register confirms a tradie holds a licence and shows any Form 4 on file for your address.
What paperwork follows a new gas installation?
A gas system compliance certificate. The licence holder hands you the original as soon as the install or alteration finishes, certifying the work complies. If a distribution network supplies your gas, its operator also receives a copy within 5 days.
Does a new gas appliance need a supply check first?
Yes, the gasfitter checks the supply before connecting an extra appliance. That covers LPG cylinder storage and vaporisation, the meter's capacity, and whether the pipe sizing suits the added load.
Are your gas fitters licensed for gas work in Griffin?
Yes, we're QBCC licensed and insured, and every job is done by a licensed plumber who holds the gas work licence the fuel side of the job requires.
Do the gas rules cover both natural gas and LPG?
Yes. Queensland's gas safety guidance covers piped natural gas and LPG alike, whether the fuel sits in cylinders or a tank. The same licence and certificate rules apply whichever one your home runs on.
Call Us About Any Gas JobWe'll call you back.
Call (07) 3524 7137 to book a plumber in Griffin. We're available 24/7, with $0 call-out fees, flat-rate pricing and same-day where we can.
Current offers:
- $80 off a tap replacement
- $60 off your first service
- $99 off blocked drains
- $220 cashback on hot water installs
T&Cs apply. Mention this offer when booking.
To claim your $0 call-out fee, call (07) 3524 7137 today.